Hello,
Im order DSX12VD and have little problems, because I can't change settings.
Im buy FTDI TTL-232R cable and connect it same as in THIS POST But when I open hyperterminal I do not receive anything :S Im try write f and F but nothing happen...
What I must to do to start programm it? With my old DSATX220 Im not have this problems when Im use USB Brainstem(S19)... Is something wrong with DSX12VD?
Im try use one RS232->TTL board which use max232 but result is same...
Thanks for any help...
Regards, _Dejan_
DSX12VD Programming
3 posts
• Page 1 of 1
DSX12VD Programming
by _Dejan_ » Mon Jun 01, 2009 3:50 pm
- _Dejan_
- Posts: 3
- Joined: Mon Jun 01, 2009 3:40 pm
Re: DSX12VD Programming
by _Dejan_ » Tue Jun 30, 2009 8:33 pm
Im order Serial Brainstem and work with my DSX12VD so FTDI TTL-232R is not compatible wiith it as we can read in one post here on forum...
- _Dejan_
- Posts: 3
- Joined: Mon Jun 01, 2009 3:40 pm
Re: DSX12VD Programming
by zootjeff » Mon Jul 06, 2009 3:49 pm
The FTDI cables are compatible. You just have to swap some pins.
- zootjeff
- Site Admin
- Posts: 44
- Joined: Mon Mar 29, 2004 2:52 am
- Location: Portland OR
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest