Syncing the DSATX with the DSX12VD?!

Intelligent 140 Watt 12V-12V
Regulated DC-DC Power Supply for Automotive Use

PostsCOLON 3
JoinedCOLON Wed Jan 09, 2008 1:39 pm

Syncing the DSATX with the DSX12VD?!

Postby deanwarez » Wed Jan 09, 2008 1:43 pm


i have sent an email to the support contact address - but then found the forums. so i thought i'd post on here too....

well as the title describes really!

do i have to fully connect up the DSX12VD as per normal and just set the POTs to the same as the DSATX? or can i not disconnect the ACC line to the DSX12VD and connect a jumper cable between the PSUs?



Return to

Who is online

Users browsing this forum: 1 and 0 guests