Power Supplies:

Product: Specification: Details:

DSATX - The DSATX is a 220 Watt DC-DC ATX Power Supply that takes an input of 12 volts (8-16) and provides 12V@12A, 5V@12A, 3.3V@10A, 5VSB@1.5A, and -12V@0.1A. It has the most advanced serial port programmable Shutdown/Startup controller available. more info

DSX12V - The DSX12V is a 140 Watt DC-DC converter that takes an input of 12 volts (8-16) and converts it to 12 volts out @ 12 Amps.  Applications: 12v Automotive Power Stabilizer, Video Power Conditioner  -- order now

DSX12VD - The DSX12VD is the Delux version of the DSX12V, 140 Watt DC-DC converter that takes an input of 12 volts (8-16) and converts it to 12 volts out @ 12 Amps. Includes an intelligent power sequencer as well as monitoring and temperature protection. more info

MPBS1

MPBS1 - The MPBS1 is a 70 Watt DC-DC ATX Power Supply converter that takes an input of 12 volts (8-16) and converts it to +12V@2A, +3.3V@5A, +5V@5A, -12V@50mA, -5V@50mA, and +5VSB@1A

ShutDown Controllers:

Product: Specification: Details:

uSDC20D - The uSDC20D is a microprocessor based automotive power sequencer for turning on and off a Computer or Accessory in the car. It will send a pulse to the motherboard to simulate someone pushing the power switch. It has a 20A switch, low voltage protection, temperature protection, and Aux outputs.

Analog SDC N/A

Analog SDC - The Analog SDC is discontinued. It was a simple Shutdown controller that used RC time constants to send a pulse to the motherboard to shut down the computer after the ignition of an automobile was turned off. 

Accessories:

Product: Specification: Details:

ATXBR01 - The ATXBR01 is used to test ATX power supplies as well as provide standard Faston 0.25" Blade connectors so other Mpegbox products or other 12-volt Accessories can be powered from a standard AC-DC power supply.

Ordering

Product Support Forums

 

Copyright 2024 Mpegbox -- All Rights Reserved